The Paris Agreement commits to reducing greenhouse gas emissions by at least 55% compared to 1990 levels, based on a comprehensive impact assessment. The CBAM proposal stipulates a three-year transition period, and the relevant provisions of the CBAM certificate will be officially implemented from January 1, 2026. It is required that by 2025, the proportion of industry production capacity and data centers reaching the energy efficiency benchmark level will exceed 30%. Currently, the industry standard for the energy conversion efficiency of electric heaters is as high as about 95%. The team believes that this theory should be challenged and commercialized to prove the past classical scientific theory, which is not wrong. Although classical science is the accumulation of hundreds of years of experience, today's material science and production technology are not the same as they were hundreds of years ago. Therefore, there is an opportunity to break through the bottleneck of science and technology. Only by completely solving the improvement of electrothermal conversion efficiency from the source of technology can we implement the global goal of carbon neutrality in the Paris Agreement. Real life experience knows the actual state of the CPU chip operation, and the CPU chip will heat up very quickly. This state of heating does not follow Joule's law of current square * impedance * time = heat energy. Fortunately, after more than ten years of technical breakthroughs, the team has finally implemented the commercialization of the energy gap theory, and in the actual cases of the commercialization of a number of electric heating products, it has been proved that it is not difficult to implement the goal of carbon neutrality.

For the industry: Electric heating product manufacturers using energy-gap heating chips can avoid the high carbon tax imposed by the ETS organization. For users: electric heating products using energy-gap heating chips as the structure, depending on the product category, have the opportunity to save electricity costs from 20% to 90%. For the State Grid: The proportion of electrothermal conversion to power consumption is as high as 50%. Therefore, when electrothermal conversion products are fully implemented, the electrothermal conversion products based on the energy gap theory can reduce the proportion of power consumption from as high as 50% to less than 25%. The 25% extra power saved due to power saving can be used as more economic base development

An electric blanket that consumes 0.01 kilowatt-hours of electricity. In 2022, it won the Success Contest Award and successfully sold in the market. Assist smart toilet lid manufacturers to realize that the heating of the toilet lid only needs 5 watts of power, which can meet the constant temperature performance of the seat cushion at 40 degrees. This product consumes about 80% less energy than traditional heating. Assist the electric heater manufacturer to change the heat source module, so that the electric heater can be reduced from 2200 watts to about 1000 watts under the same air outlet temperature. Assist the electric fryer manufacturer to change the heat source module, so that the electric fryer can reduce the frying temperature from 10,000 watts to below 5,000 watts at the same frying temperature. Assist the electric oven industry to change the heat source module, so that the electric oven can be reduced from 10,000 watts to below 5,000 watts at the same oven temperature. To assist energy storage station operators to reduce energy consumption by more than half of that of traditional battery insulation heaters, so that the battery temperature can be maintained at an ambient temperature above zero. Assist battery car manufacturers to keep the battery temperature above zero with a power consumption of less than 10 watts, so as to ensure that the mileage of the battery car will not be affected by a sudden drop in ambient temperature. Assist the new energy vehicle industry to complete the Carnot cycle, replace the compressor heat pump or refrigeration cycle with electric heat conversion, and implement the constant temperature management system of the new energy vehicle battery within 100 watts under the condition of no mechanical movement, greatly reducing energy consumption loss And the weight of the radiator greatly increases the mileage of new energy vehicles. Others: For example, home appliances that only need a power bank to work, such as electric coffee stoves, electric drinking machines, electric irons, curling irons, egg steamers, insulated lunch boxes,,,,, etc. Dozens of commercialization of home appliances .

The realization of carbon neutrality/peak carbon dioxide emissions is both a national goal and an international wish. Although there have long been theories that generate great heat with low energy consumption in the past century, the appropriate materials that work for the theories were never found. Our product seems ordinary on the surface, but it’s the fruit of our belief that science works for people. We strove to provide a product available for everyone in the first place before we worked hard to achieve its commercialization, and we believe there will be more products that help to achieve carbon neutrality/peak carbon dioxide emissions in the future.

This was requested to remain secret

Theoretical verification - Development of new materials - 3-stage modular trial production - Overseas product sales - Overseas marketing experience - Domestic market research - Deployment of domestic producers - Implementation of supply chain management - Certification of products - Launch and sales of products The products were ready for sales, and the validation reports of the products were also available.

2-year verification of the energy band theory + 3-year development of the fourth generation silicon carbide materials and patent application + 1-year construction of factories and production of new materials + 3-year overseas market development and sales + 1-year commercialization (domestic market development + production and development of the whole series of products + production inspection + market research and sales) Up to now, we’ve spent over ten years on this project and the total capital investment was over 30 million RMB (This information could be made public)

The goal of commercialization has been achieved.